Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T10:57:54.802Z Has data issue: false hasContentIssue false

Secondary Electron Emission Studies of Diamond and GaN Materials

Published online by Cambridge University Press:  10 February 2011

J.E. Yater
Affiliation:
Naval Research Laboratory, Washington, D.C. 20375
A. Shih
Affiliation:
Naval Research Laboratory, Washington, D.C. 20375
D.S. Katzer
Affiliation:
Naval Research Laboratory, Washington, D.C. 20375
Get access

Abstract

Secondary electron emission spectroscopy is used to examine the transport and emission of low-energy electrons in several wide bandgap materials. In particular, the secondary emission properties of C(100), C(111), and CVD diamond samples are compared in order to examine the effect of crystallographic orientation on the emission characteristics. Very high yields are obtained from hydrogenated and cesiated negative-electron-affinity surfaces of all three samples, indicating that low-energy electrons are transported and emitted very efficiently in the diamond materials. While the energy distribution of the emitted electrons is found to be sharply peaked at low energy for all three samples, the energy distributions measured from the C(111) surfaces are broader and reveal structure in the energy gap. The different emission processes at the C(100) and C(111) surfaces may account for the energy distributions observed from the polycrystalline CVD diamond. Finally, initial secondary emission measurements are taken from GaN and AlGaN films grown by molecular beam epitaxy. The secondary emission is not as strong as from the diamond samples, and the measurements reveal the impact of interface and surface barriers on the emission process.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable