Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T21:05:45.987Z Has data issue: false hasContentIssue false

Selection of Optimum Nonlinear Crystals for Efficient Parametric Generation and Sensitive Detection of Monochromatic ns THz Pulses

Published online by Cambridge University Press:  01 February 2011

Yujie J. Ding*
Affiliation:
yud2@lehigh.edu, Lehigh University, Electrical and Computer Engineering, 19 Memorial Drive West, Bethlehem, PA, 18015, United States, (610) 758-4582, (610) 758-6279
Get access

Abstract

We report our recent progress made on the development of widely-tunable monochromatic THz sources. They have been realized based on difference-frequency generation (DFG) in GaSe, ZnGeP2, and GaP crystals, respectively. Using a GaSe crystal, the output wavelength was tuned continuously in the range from 66.5 µm to 5664 µm (from 150 cm-1 to 1.77 cm-1) with the peak power reaching 389 W. Such a high peak power corresponds to a conversion efficiency of about 0.1% (a photon conversion efficiency of 19%). A further optimization on the THz beam parameter may result in an output peak power of a few kW. Within the range of 100-250 µm the output peak powers were higher than 100 W. We have also investigated THz frequency upconversion in GaSe, ZnGeP2, and GaP crystals. Such a parametric process has a potential for detecting THz pulses at room temperature or just using a thermoelectric cooler. The minimum detectable energy per pulse was measured to be 245 pJ, which corresponds to a noise equivalent energy of 77.5 . A further optimization of the process can reduce this value down to 1 .

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable