Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T10:23:01.298Z Has data issue: false hasContentIssue false

Selective Doping of 4H-SiC by Aluminum/Boron Co-diffusion

Published online by Cambridge University Press:  21 March 2011

Ying Gao
Affiliation:
University of South Carolina, Department of Electrical Engineering, Columbia, SC 29208, U.S.A.
S. I. Soloviev
Affiliation:
University of South Carolina, Department of Electrical Engineering, Columbia, SC 29208, U.S.A.
X. Wang
Affiliation:
University of South Carolina, Department of Electrical Engineering, Columbia, SC 29208, U.S.A.
C. C. Tin
Affiliation:
Auburn University, Physics Department, Auburn, AL 36849, U.S.A.
T. S. Sudarshan
Affiliation:
University of South Carolina, Department of Electrical Engineering, Columbia, SC 29208, U.S.A.
Get access

Abstract

Based upon graphite mask, selective aluminum/boron doping of SiC by thermal diffusion has been successfully realized in a temperature range of 1800 to 2100°C. Secondary ion mass spectrometry (SIMS) was used to identify the doping profiles, which showed very high aluminum concentration (5×1019 cm−3) near the surface and linearly graded boron profile up to several micrometers in depth. Hall-effect measurement was also employed to obtain the carrier concentration, which showed more than 1019 cm−3 carrier concentration at room temperature. Cathodoluminescence (CL) image clearly illustrated the locally diffused pattern. In addition, planar p-n diodes based upon this technique were fabricated and current-voltage (I-V) characteristics were measured. Excellent rectification property has been obtained. Built-in voltage of 2.9 V in the formed p-n junction was obtained by capacitance-voltage (C-V) measurement.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable