Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T21:15:56.145Z Has data issue: false hasContentIssue false

Silicon Nitride from Microwave Plasma: Fabrication and Characterization

Published online by Cambridge University Press:  28 February 2011

Yves Tessier
Affiliation:
Groupe des Couches Minces (GCM) and Dept.of Engineering Physics, Ecole Polytechnique, Box 6079, Station “A”, Montreal, Quebec H3C 3A7 Canada
J. E. Klemberg-Sapieha
Affiliation:
Groupe des Couches Minces (GCM) and Dept.of Engineering Physics, Ecole Polytechnique, Box 6079, Station “A”, Montreal, Quebec H3C 3A7 Canada
S. Poulin-Dandurand
Affiliation:
Groupe des Couches Minces (GCM) and Dept.of Engineering Physics, Ecole Polytechnique, Box 6079, Station “A”, Montreal, Quebec H3C 3A7 Canada
M. R. Wertheimer
Affiliation:
Groupe des Couches Minces (GCM) and Dept.of Engineering Physics, Ecole Polytechnique, Box 6079, Station “A”, Montreal, Quebec H3C 3A7 Canada
Get access

Abstract

Plasma silicon nitride (P-SiN) films were prepared from SiH4/NH3 mixtures in a large volume microwave plasma (LMP) apparatus, at substrate temperatures T2 ranging from ambient to 250°C.Under otherwise nominally identical fabrication conditions, deposition rates were 10 to 25 times greater than those reported by others for radio- or audio-frequency plasmas.Based on film compositions, determined by elastic recoil detection (ERD), and measurements of such properties as density, refractive index, etch rate in dilute HF, and moisture permeation coefficient, our best P-SiN films (produced at T2 ≥ 200°C) are very similar to those reported in the literature.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable