Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T11:47:28.700Z Has data issue: false hasContentIssue false

A Simple Technique for Sub-10 nm Planar Nanofluidic Channel Fabrication

Published online by Cambridge University Press:  31 January 2011

Chunrong Song
Affiliation:
chunros@clemson.edu, Clemson University, ECE, Clemson, South Carolina, United States
Pingshan Wang
Affiliation:
pwang@clemson.edu, Clemson University, ECE, Clemson, South Carolina, United States
Get access

Abstract

A simple and low-cost technique is demonstrated to fabricate sub-10 nm planar nanofluidic channels. Native oxide on silicon surface is etched with a multiple hydrofluoric (HF)-etch / SiO2-regrowth process. Shallow Si trenches with 3 nm to 24 nm depths are obtained at an etch rate of 1 nm per HF dip. The trenches are uniform with a surface r.m.s. roughness of 0.4 - 0.6 nm. A low-temperature and low-voltage anodic wafer bonding process is then used to form planar nanofluidic channels. Minimum aspect ratio (depth/width) of the fabricated sub-10 nm nanochannels is around 0.001-0.002.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable