Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T19:50:48.114Z Has data issue: false hasContentIssue false

Size Reduction of Silicon Nanopillars by Photo-Electrochemical Etching

Published online by Cambridge University Press:  17 March 2011

Robert Juhasz
Affiliation:
Royal Institute of Technology, Department of Electronics, Stockholm, SWEDEN
Jan Linnros
Affiliation:
Royal Institute of Technology, Department of Electronics, Stockholm, SWEDEN
Pascal Kleimann
Affiliation:
LENAC, Université Claude Bernard Lyon I, Villeurbanne, FRANCE
Get access

Abstract

Silicon nanopillars, formed by electron beam lithography, were electrochemically etched to provide controlled size reduction. The smallest dimensions achieved were pillars of 15 nm in diameter, restricted mainly by the scanning electron microscope used for characterization. The etch rate was mainly determined by the photogeneration of carriers, by the HF concentration and by the applied voltage bias. The applied bias also controlled the resulting shape of the pillars such that a high bias resulted in etching of the pillar top whereas a negative bias caused etching only at the pillar base. For 0 V, a relatively conform etching of the pillar was observed. We discuss these phenomena in terms of electropolishing or pore formation effects on a local scale.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable