Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T16:51:52.891Z Has data issue: false hasContentIssue false

Smart Composite Biomaterials TiAIV/AI2O3/TiNi

Published online by Cambridge University Press:  10 February 2011

Peter Filip
Affiliation:
Technical University of Ostrava, Institute of Materials Engineering, CZ-708 33 Ostrava-Poruba, Czech Republic
Jaroslav Musialek
Affiliation:
Municipal Hospital Ostrava-Fifejdy, Orthopedic Clinic, Nemocnicni 20, CZ-728 80 Ostrava-Fifejdy, Czech Republic
Albert C. Kneissl
Affiliation:
University of Leoben, Institute of Physical Metallurgy and Materials Testing, A-8700 Leoben, Austria.
Karel Mazanec
Affiliation:
Technical University of Ostrava, Institute of Materials Engineering, CZ-708 33 Ostrava-Poruba, Czech Republic
Get access

Abstract

The TiNi shape memory alloy wires were plasma coated by α-Al2O3 ceramics and afterwards they were cast into Ti6Al4V or Ti6Al1.5V2.5Nb (Ti-alloy) matrix. The wire fibers melt and the alumina ceramics reacts with both TiNi and Ti-alloy if cooling rate is small. The interphases which are formed are Ti2(Al, Ni) and Ti3AL-type phases, respectively. The structure of TiNi wires changes to dendritic one, Ti-alloys contain 10 to 15% of primary α and transformed β phase. The optimal conditions for rolling are 900°C with reductions of 5%. At this conditions all the constituents of composite material can be deformed plastically. The adhesive strength of TiNi/Al2O3 is 60 MPa.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable