Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-14T03:51:00.566Z Has data issue: false hasContentIssue false

Smart Thin Film TiNi/Pzt Heterostructures

Published online by Cambridge University Press:  16 February 2011

Peter G. Mercado
Affiliation:
Smart Materials Laboratory Dept. of Materials Science and Eng., SUNY at Stony Brook, Stony Brook, NY 11794-2275
A.Peter Jardine
Affiliation:
Smart Materials Laboratory Dept. of Materials Science and Eng., SUNY at Stony Brook, Stony Brook, NY 11794-2275
Get access

Abstract

Thin film layers of shape memory alloys and ferroelectric ceramics can produce a family of ‘smart’ heterostructures capable of performing both sensing and actuating functions. Important issues in the synthesis of these active structures are the ability to generate the appropriate crystalline phases of each material, while producing defect-free homogeneous high quality films. The compatibility of sol-gel processed Pb(Zr,Ti)O3 (PZT) thin films with thin film shape memory effect TiNi substrates were investigated. Thin film TiNi was deposited on quartz substrates by physical sputter deposition utilizing a TiNi target in a ultra-high vacuum chamber, and followed by in-situ vacuum annealing. PZT was deposited on TiNi by sol-gel and spin coating processes. The ferroelectric tetragonal phase of PZT was obtained by a 600 °C anneal for 5m in air. The heterostructures were nominally defect-free, unlike those obtained through deposition onto bulk TiNi substrates.x

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable