Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T23:41:03.517Z Has data issue: false hasContentIssue false

Solidification and Microstructure Control of Mg-rich Alloys in the Mg-Zn-Y Ternary Systemya

Published online by Cambridge University Press:  17 March 2011

E.S. Park
Affiliation:
Center for Non-crystalline Materials, Department of Metallurgical Engineering, Yonsei University, 134 Shinchondong Seodaemungu, Seoul, 120-749, Korea
S. Yi
Affiliation:
Center for Non-crystalline Materials, Department of Metallurgical Engineering, Yonsei University, 134 Shinchondong Seodaemungu, Seoul, 120-749, Korea
J.B. Ok
Affiliation:
Center for Non-crystalline Materials, Department of Metallurgical Engineering, Yonsei University, 134 Shinchondong Seodaemungu, Seoul, 120-749, Korea
D.H. Bae
Affiliation:
Center for Non-crystalline Materials, Department of Metallurgical Engineering, Yonsei University, 134 Shinchondong Seodaemungu, Seoul, 120-749, Korea
W.T. Kim
Affiliation:
Center for Non-crystalline Materials, Department of Physics, Chongju University, 36 Naedokdong, Chongju, 360-764, Korea
D.H. Kim
Affiliation:
Center for Non-crystalline Materials, Department of Metallurgical Engineering, Yonsei University, 134 Shinchondong Seodaemungu, Seoul, 120-749, Korea
Get access

Abstract

Solidification microstructures of Mg rich Mg-Zn-Y alloys were studied by using optical microscopy, scanning electron microscopy and transmission electron microscopy. Pseudo eutectic reaction (Liquid→α-Mg + icosahedral phase) takes place during solidification. Alloys containing high Mg content solidifies by primary crystallization ofα-Mg followed by the eutectic reaction at interdendritic region. Mg68Zn28Y4 alloy solidifies by primary crystallization of I-phase followed by theeutectic reaction into a mixture of α-Mg and I-phase. Occasionally D-phase and Mg4Zn7 phases were observed to form with orientation relationships with previously formed I-phase and D-phase, respectively. Thestrength of the alloys increased with increasing the volume fraction of I-phase.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable