Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T03:22:18.574Z Has data issue: false hasContentIssue false

Spark Plasma Sintering of Yttria-Stabilized Zirconia/Titanium Nitride Composites

Published online by Cambridge University Press:  16 February 2015

Paulo S. M. Silva
Affiliation:
Nuclear and Energy Research Institute – IPEN, São Paulo, SP, 05508-000, Brazil.
Fabio C. Fonseca
Affiliation:
Nuclear and Energy Research Institute – IPEN, São Paulo, SP, 05508-000, Brazil.
Get access

Abstract

Composites of 8 mol% yttria-stabilized zirconia (YSZ) and titanium nitride (TiN) were obtained by mechanical mixing of commercial powders. High-density samples of (1-x) YSZ / x TiN, with x = 0, 25, 50, and 75 wt.%, were obtained by spark plasma sintering (SPS) at 1450 °C for 5 min. Surface contamination with carbon from the SPS was eliminated by diamond sawing of parallel surfaces. X-rays diffraction analyses showed that samples are composed by a mixture of the initial phases, without appreciable reaction as inferred from calculated lattice parameters. dc 4-probe electrical measurements in the 100-850°C under showed that samples have a metallic behavior, indicating that the percolation threshold was attained for the sample with the lowest content of the TiN (x=25 wt.%), which corresponds to ∼27 vol.%.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable