Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-14T21:46:48.236Z Has data issue: false hasContentIssue false
  • English
  • Français

Spectroscopic and Microstructural Characterization of Solution Chemistry Effects in Pzt Thin Film Processing

Published online by Cambridge University Press:  25 February 2011

Robert W. Schwartz,
R. A. Ass Ink and
T. J. Headley
Robert W. Schwartz
Affiliation:
Sandia National Laboratories, Materials and Process Sciences Directorate, P. O. Box 5800, Albuquerque, NM 87185
R. A. Ass Ink
Affiliation:
Sandia National Laboratories, Materials and Process Sciences Directorate, P. O. Box 5800, Albuquerque, NM 87185
T. J. Headley
Affiliation:
Sandia National Laboratories, Materials and Process Sciences Directorate, P. O. Box 5800, Albuquerque, NM 87185
Get access

Abstract

Ferroelectric PZT 53:47 thin films were prepared by two different solution deposition methodologies. Both routes utilized carboxylate and alkoxide precursors and acetic acid, which served as both a solvent and a chemical modifier. We have studied the effects of solution preparation conditions on film microstructure and ferroelectric properties, and have used NMR spectroscopy to characterize chemical differences between the two precursor solutions. Films prepared by a sequential precursor addition (SPA) process were characterized by slightly lossy hysteresis loops, with a Pr of 18.7 μC/cm2 and an Ec of 55.2 kV/cm. Films prepared by an inverted mixing order (IMO) process were characterized by well saturated hysteresis loops, a Pr of 26.2 μC/cm2 and an Ec of 43.3 kV/cm. While NMR investigations indicated that the chemical environments of both the proton and carbon species were similar for the two processes, differences in the amounts of by-products (esters, and therefore, water) formed were noted. These differences apparently impacted ceramic microstructure. Although both films were characterized by a columnar growth morphology, the SPA derived film displayed a residual pyrochlore layer at the film surface, which did not transform into the stable perovskite phase. The presence of this layer resulted in poor dielectric properties and lossy ferroelectric behavior.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 243: Symposium G – Ferroelectric Thin Films II , 1991, 245
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Budd, K. D., Dey, S. K., and Payne, D. A., Brit. Ceram. Soc. Proc., 36, 107 (1985).Google Scholar
2. Vest, R. W. and Xu, J., Ferroelectrics, 93, 21 (1989).Google Scholar
3. Fukushima, J., Kodaira, K., and Matsushita, T., J. Mater. Sci., 19, 595 (1984).Google Scholar
4. Yi, G., Wu, Z., and Sayer, M., J. Appl. Phys., 64 (5), 2717 (1988).Google Scholar
5. Haertling, G. H., Ferroelectrics, 116, 51 (1991).Google Scholar
6. Schwartz, R. W. et al. , accepted for publication in Ferroelectrics, (1992).Google Scholar
7. Tuttle, B. A. et al. , in Ferroelectric Thin Films, edited by Myers, E. R. and Kingon, A. I. (Mat. Res. Soc. Proc., 200, Pittsburgh, 1990) pp. 159–165.Google Scholar
8. Pouchert, C. J., The Aldrich Library of NMR Spectra, Edition II, (Aldrich Chemical Company, Inc., Milwaukee, 1983).Google Scholar
9. Bhacca, N. S. et al. , NMR Spectra Catalog, (Varian Associates, 1962).Google Scholar
10. Keefer, K. D., in Better Ceramics Through Chemistry, edited by Brinker, C. J., Clark, D. E., and Ulrich, D. R. (Mat. Res. Soc. Proc., 32, North Holland Publishers, New York, 1984) pp. 15–241.Google Scholar
11. Kalinowski, H. O., Berger, S., and Braun, S., Carbon-13 NMR Spectroscopv, (John Wiley & Sons, New York, 1988).Google Scholar
12. Doeuff, S. et al. , J. Non-.Cryst. Sol., 89, 206 (1987).Google Scholar
13. Doeuff, S., Henry, M., and Sanchez, C., Mat. Res. Bull., 25, 1519 (1990).Google Scholar
14. Doeuff, S. et al. , Inorg. Chem., 28, 4439 (1989).Google Scholar
15. Brinker, C. J., Hurd, A. J., and Wall, K. J., in Ultrastructure Processing of Advanced Ceramics, edited by Mackenzie, J. D. and Ulrich, D. R. (Wiley & Sons, Inc., New York, 1988) pp. 223–240.Google Scholar
16. Carim, A. H. et al. , J. Am. Ceram. Soc., 74 (6), 1455 (1991).Google Scholar