Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T21:36:41.244Z Has data issue: false hasContentIssue false

Spent UO2 Fuel Corrosion in Water; Release Mechanisms

Published online by Cambridge University Press:  28 February 2011

Lars O. Werme
Affiliation:
Swedish Nuclear Fuel and Waste Management Co, Box 5864, S-102 48 Stockholm, Sweden
Roy S. Forsyth
Affiliation:
Studsvik Energiteknik AB, S-611 82 Nyköping, Sweden
Get access

Abstract

An update of the status of the joint SKB/Studsvik fuel leaching programme is given. High burnup BWR fuel has been leached for up to 5.5 years cumulated contact time. Data for leaching of PWR fuel are also presented. The present results confirm earlier results from the programme, i.e., in groundwater and deionized water under oxidizing conditions uranium rapidly attains saturation at about 1 mg/l and 10 μg/l, respectively.

Under reducing conditions, the uranium saturation levels are below 1μg/l. The plutonium saturation level under oxidizing conditions is at about 0.3 μg/l. Under reducing conditions, the plutonium concentrations in solution appear to be controlled by the solubility of the fuel matrix.

Most of the detected fission products appear to be released through selective leaching of fuel/cladding gap, fuel cracks and fissures, and grain boundaries.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable