Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-18T09:27:34.939Z Has data issue: false hasContentIssue false

Stability of Ultra-Thin Gate Oxides with Boron Doped Polysilicon Gate Structures After Rapid Thermal Annealing

Published online by Cambridge University Press:  21 February 2011

Bojun Zhang
Affiliation:
Dept. of Materials Science and Engineering, North Carolina State University, Raleigh, NC
Dennis M. Maher
Affiliation:
Dept. of Materials Science and Engineering, North Carolina State University, Raleigh, NC
Mark S. Denker
Affiliation:
Microelectronics Center of North Carolina, Research Triangle Park, NC
Mark A. Ray
Affiliation:
Microelectronics Center of North Carolina, Research Triangle Park, NC
Get access

Abstract

We report a systematic study of dopant diffusion behavior for thin gate oxides and polysilicon implanted gate structures. Boron behavior is emphasized and its behavior is compared to that of As+ and BF2+. Dopant activation is achieved by rapid thermal annealing. Test structures with 100 Å, 60 Å and 30 Å gate oxides and ion implanted polysilicon gate electrodes were fabricated and characterized after annealing by SIMS, SEM, TEM, and C-V rpeasurements. For arsenic implanted structures, no dopant diffusion through a gate oxide of 30 Å thickness and an annealing condition as high as 1 100*C/1Os was observed. For boron implanted structures, as indicated by SIMS depth profiling, structures annealed at 1000*C/10s exhibit a so-called critical condition for boron diffusion through a 30 Å gate oxide. Boron dopant penetration is clearly observed for 60 Å gate oxides at an annealing condition of 1050 0C/10s. The flatband voltage shift can be as high as 0.56 volts as indicated by C-V measurements for boron penetrated gate oxides. However, 100 Å gate oxides are good diffusion barriers for boron at an annealing condition of 1100°C/10s. For BF2 implanted structures, the diffusion behavior is consistent with behavior reported in the literature.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable