Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T17:09:21.639Z Has data issue: false hasContentIssue false

Strain Relaxation at Low Misfits: Dislocation Injection vs. Surface Roughening

Published online by Cambridge University Press:  21 February 2011

D.D. Perovic
Affiliation:
Department of Metallurgy and Materials Science, University of Toronto, Toronto M5S 1A4 Canada;, Email: perovic@ecf.utoronto.ca
B. Bahierathan
Affiliation:
Department of Metallurgy and Materials Science, University of Toronto, Toronto M5S 1A4 Canada;, Email: perovic@ecf.utoronto.ca
D.C. Houghton
Affiliation:
Institute for Microstructural Sciences, National Research Council, Ottawa K1A 0R6 Canada.
H. Lafontaine
Affiliation:
Institute for Microstructural Sciences, National Research Council, Ottawa K1A 0R6 Canada.
J.-M. Baribeau
Affiliation:
Institute for Microstructural Sciences, National Research Council, Ottawa K1A 0R6 Canada.
Get access

Abstract

Two competing strain relaxation mechanisms, namely misfit dislocation generation and surface roughening, have been extensively studied using the GexSi1-x /Si (x< 0.5) system as an example. A predictive model has been developed which accurately describes the nature of misfit dislocation nucleation and growth under non-equilibrium conditions. Using optical and electron microscopy, coupled with a refined theoretical description of dislocation nucleation, it is shown that strain relieving dislocations are readily generated at low misfits with a characteristic activation energy barrier regardless of the growth technique employed (i.e. MBE, RTCVD and UHVCVD). Secondly we have studied the alternative elastic strain relaxation mechanism involving surface undulation; x-ray diffraction, electron and atomic force microscopy have been used to characterize Gex Si1-x /Si (x<0.5) structures grown by UHVCVD and MBE at relatively higher temperatures. A theoretical model has been used to model the critical thickness for surface wave generation. The conditions governing the interplay between dislocation formation and surface buckling are described in terms of a "morphological instability diagram".

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable