Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T19:56:46.181Z Has data issue: false hasContentIssue false

Strength Measurement in Brittle Thin Films

Published online by Cambridge University Press:  01 February 2011

Oscar Borrero-Lopez
Affiliation:
oscar@unsw.edu.au, University of New South Wales, Sydney, Materials Science and Engineering, School of Materials Science & Engineering, UNSW Gate 2, High Street, Kensington NSW 2052 Australia, Sydney, N/A, Australia
Mark Hoffman
Affiliation:
mark.hoffman@unsw.edu.au, University of New South Wales, Sydney, NSW 2025, Australia
Avi Bendavid
Affiliation:
Avi.Bendavid@csiro.au, CSIRO, Materials Science and Engineering, Lindfield, NSW 2070, Australia
Phil J Martin
Affiliation:
Phil.Martin@csiro.au, CSIRO, Materials Science and Engineering, Lindfield, NSW 2070, Australia
Get access

Abstract

In this work we have investigated the strength variability of brittle thin films (thickness ≤ 1 μm) utilising a simple test methodology. Nanoindentation of as-deposited tetrahedral amorphous carbon (ta-C) and Ti-Si-N nanocomposite films on silicon substrates followed by cross-sectional examination of the damage with a Focused Ion Beam (FIB) Miller allows the occurrence of cracking to be assessed in comparison with discontinuities (pop-ins) in the load-displacement curves. Strength is determined from the critical loads at which cracking occurs using the theory of plates on a soft foundation. This is of great relevance, since the fracture strength of thin films ultimately controls their reliable use in a broad range of functional applications.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable