Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T23:14:43.129Z Has data issue: false hasContentIssue false

Stress Determination in Thermally Grown Alumina Scales Using Ruby Luminescence

Published online by Cambridge University Press:  15 February 2011

D. Renusch
Affiliation:
Argonne National Laboratory, Argonne IL 60439, USA
B. W. Veal
Affiliation:
Argonne National Laboratory, Argonne IL 60439, USA
I. Koshelev
Affiliation:
Argonne National Laboratory, Argonne IL 60439, USA
K. Natesan
Affiliation:
Argonne National Laboratory, Argonne IL 60439, USA
M. Grimsditch
Affiliation:
Argonne National Laboratory, Argonne IL 60439, USA
P. Y. Hou
Affiliation:
Lawrence Berkeley Laboratory, Berkeley CA 94720, USA
Get access

Abstract

By exploiting the strain dependence of the ruby luminescence line, we have measured the strain in alumina scales thermally grown on Fe-Cr-Al alloys. Results are compared, and found to be reasonably consistent with strains determined using x-rays. Oxidation studies were carried out on alloys with compositions Fe - 5 Cr - 28 Al and Fe - 18 Cr - 10 Al (at. %, bal. Fe). Significantly different levels of strain buildup were observed in scales on these alloys. Results on similar alloys containing a “reactive element” (Zr or Hf) in dilute quantity are also presented. Scales on alloys containing a reactive element (RE) can support significantly higher strains than scales on RE-free alloys. With the luminescence technique, strain relief associated with spallation thresholds is readily observed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable