Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T15:07:12.380Z Has data issue: false hasContentIssue false

Stress Measurement Using a Bilayer Metal-Ceramic Strip

Published online by Cambridge University Press:  15 February 2011

Shukla Kapur
Affiliation:
IBM Corporation, Hopewell Junction, NY 12533
Philip L. Flaltz
Affiliation:
IBM Corporation, Hopewell Junction, NY 12533
Get access

Abstract

Residual stresses that develop in metal/ceramic bonded systems due to thermal expansion mismatch have been calculated using finite element modelling and measured experimentally using a simple bilayer strip. Bending in the strip occurs during cooling due to the stress asymmetry. Residual stresses are calculated by measuring the deflection of the strip and the temperature at which the strip is flat. Various compositions of both copper and nickel pastes, with and without glass and other second phase additions were evaluated on glass-ceramic. The effects of further processes, e.g. thermal cycling, brazing and plating, are also reported in this work.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable