Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T09:51:44.336Z Has data issue: false hasContentIssue false

Structural Characterization and Analysis of Glasses in the Al2O3-B2O3-Fe2O3-Na2O-SiO2 System

Published online by Cambridge University Press:  25 January 2013

S.V. Stefanovsky
Affiliation:
SIA Radon, 7th Rostovskii lane 2/14, Moscow 119121 Russia, profstef@mtu-net.ruInstitute of Physical Chemistry and Electrochemistry RAS, Leninskii av. 31, Moscow 119071 Russia
B.S. Nikonov
Affiliation:
Institute of Geology of Ore Deposits RAS, Staromonetniy 35, Moscow 119117 Russia
B.I. Omelyanenko
Affiliation:
Institute of Geology of Ore Deposits RAS, Staromonetniy 35, Moscow 119117 Russia
K.M. Fox
Affiliation:
Savannah River National Laboratory, Building 773-A, Aiken 29808 U.S.A.
J.C. Marra
Affiliation:
Savannah River National Laboratory, Building 773-A, Aiken 29808 U.S.A.
Get access

Abstract

Glasses in the Al2O3-B2O3-Fe2O3-Na2O-SiO2 system were produced at a temperature of 1150 °C, annealed, and examined using XRD and SEM/EDX. Surfaces of same samples were additionally heat-treated and etched with HCl. The pristine samples were X-ray amorphous and rather homogeneous except the B1 sample that contained trace crystalline phases of carnegieite/nepheline and spinel. Corrosion of these glasses via an etching treatment proceeds by a conventional mechanism with damage of their surface layers, however, the B2 glass exhibits a “drop-type” microstructure after etching that suggests occurrence of liquid-liquid phase separation.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable