Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T17:59:23.685Z Has data issue: false hasContentIssue false

Structural, Magnetic and Magneto-tranport Properties of Reactive-sputtered Fe3O4 Thin Films

Published online by Cambridge University Press:  01 February 2011

Xinghua Wang
Affiliation:
WANG0422@ntu.edu.sg, Nanyang technological university, Singapore, Singapore
Sarjoosing Goolaup
Affiliation:
SGOOLAUP@ntu.edu.sg, Nanyang technological University, Singapore, Singapore
Peng Ren
Affiliation:
REN@ntu.edu.sg, Nanyang Technological University, Singapore, Singapore
Wen Siang Lew
Affiliation:
wensing@ntu.edu.sg, Nanyang Technological University, Singapore, Singapore
Get access

Abstract

Thin films of magnetite (Fe3O4) are grown on a single-crystal Si/SiO2 (100) substrate with native oxide using DC reactive sputtering technique at room tempreture (RT) and 300C. The x-ray diffraction(XRD) result shows the thermal energy during deposition enhances the crystallization of the Fe3O4 and x-ray photoelectron spectroscopy confirms the film deposited at 300C is single-phase Fe3O4 while the film deposited at RT is mostly ν-Fe2O3. The electrical measurements show that the resistivity of the Fe3O4 film increases exponentially with decreasing temperature, and exhibit a sharp metal-insulator transition at around 100 K, indicating the Verwey transition feature. The saturation magnetization Ms of Fe3O4 film measured by vibrating sample measurement (VSM) at RT was found to be 445 emu/cm3.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable