Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T12:41:07.605Z Has data issue: false hasContentIssue false

Structured monocrystalline Si thin-film modules from layer-transfer using the porous Si (PSI) process

Published online by Cambridge University Press:  21 March 2011

Auer Richard
Affiliation:
Bavarian Center for Applied Energy Research (ZAE Bayern) Am Weichselgarten 7, D-91058 Erlangen, Germany
Brendel Rolf
Affiliation:
Bavarian Center for Applied Energy Research (ZAE Bayern) Am Weichselgarten 7, D-91058 Erlangen, Germany
Get access

Abstract

We demonstrate a novel technique for fabricating monolithically series connected solar modules from surface structured thin monocrystalline Si films that we prepare by layer transfer using porous Si (PSI process). The novel series connection technique bases on reactive ion etching of the silicon film in a microwave plasma prior and after layer transfer. The module has an area of 25 cm2 and consists of 5 unit cells that have a film thickness of 16 µm. We measure an open-circuit voltage of 3028 mV and a confirmed efficiency of 9.9%. The Si film has a randomly textured surface for light trapping.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable