Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T16:18:16.094Z Has data issue: false hasContentIssue false

Study of CIGS Solar Cells Back Contact

Published online by Cambridge University Press:  01 February 2011

Sylvain Marsillac
Affiliation:
sxm@physics.utoledo.edu, University of Toledo, Physics and Astronomy, 2801 W. Bancroft Street, Mail Stop #111, Toledo, OH, 43606, United States
Himal Khatri
Affiliation:
Himal.khatri@utoledo.edu, Wright Center for Photovoltaic Innovation and Commercialization, Physics and Astronomy, University of Toledo, 2801 W. Bancroft Street, Mail Stop #111, Toledo, OH, 43606, United States
Get access

Abstract

Molybdenum thin films were deposited by r.f. magnetron sputtering. The strain in the films was mostly tensile and varied, with the Argon pressure and the r.f. power, along a bell curve, reaching a maximum at 8 mTorr (80 W) and 6 mTorr (100 W). The grain size deduced from the X-Ray diffraction measurements (FWHM) decreased with increasing Argon pressure and, to a lower extent, with decreasing r.f power. The change in grain size, as well as in morphology, was confirmed by AFM imaging. Finally, the resistivity of the films was found to increase with increasing Argon pressure, while the films maintained good adhesion to the soda-lime glass substrates for all Argon pressures and r.f. power.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable