Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T08:27:01.202Z Has data issue: false hasContentIssue false

Subcritical Debonding of Multilayer Interconnect Structures: Temperature and Humidity Effects

Published online by Cambridge University Press:  10 February 2011

Michael Lane
Affiliation:
Department of Materials Science and Engineering, Stanford University
Reiner Dauskardt
Affiliation:
Department of Materials Science and Engineering, Stanford University
Qing Ma
Affiliation:
Intel Corp., Santa Clara, CA
Harry Fujimoto
Affiliation:
Intel Corp., Santa Clara, CA
Nety Krishna
Affiliation:
Applied Materials, Santa Clara, CA
Get access

Abstract

Thin film structures may fail by progressive or time-dependent debonding at stresses far below those required for catastrophic failure. Previous work has shown that progressive debonding in a typical interconnect structure occurs either along the TiN/SiO2 interface or parallel to this interface in the SiO2 Such subcritical debonding was found to span several orders of magnitude of debond growth rates and occur at significantly reduced driving forces. The presence of SiO2 at the failure location indicates that the mechanisms which give rise to stress corrosion cracking in bulk glasses may also play a role in the subcritical debonding behavior of multilayer interconnect structures. Accordingly, this work focuses on the effects of temperature and humidity on subcritical debonding and rationalizes them in terms of the relevant chemical reactions taking place at the debond tip.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable