Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T16:09:33.929Z Has data issue: false hasContentIssue false

Sulfate-Resistant Portland Cement from Lime-Soda Sinter Process Residue

Published online by Cambridge University Press:  21 February 2011

J. A. Chesley
Affiliation:
Construction Technology Laboratories, Inc., 5420 Old Orchard Road, Skokie, IL 60077
G. Burnet
Affiliation:
Ames Laboratory, U.S.D.O.E. and Department of Chemical Engineering, Iowa State University, Ames, IA 50011.
Get access

Abstract

A by-product (residue) from the Ames Lime-Soda Sinter Process for recovering alumina from power plant fly ash consists largely of dicalcium silicate and can be used as a raw material for the manufacture of sulfate-resistant (Type V) portland cement. Utilization of the residue will eliminate the need for its disposal and will improve the economic feasibility of the lime-soda sinter process. Laboratory burnability tests were used to identify optimum cement mixes and burning temperatures from both clinker quality and economic perspectives. At a typical kiln temperature of 1450°C, cements that formed concrete that exceeded ASTM specifications for strength were obtained for a limited range of lime-saturation factors and silica ratios. A highly conservative cost estimate for a combined alumina recovery and cement manufacturing facility for a 1000 MWe coal-fired power station gave a 4.7% internal rate of return.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable