Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T19:33:56.734Z Has data issue: false hasContentIssue false

Superplastic Deformation and Viscous Flow in an Zr-Based Metallic Glass at 410°C

Published online by Cambridge University Press:  10 February 2011

T. G. Nieh
Affiliation:
Lawrence Livermore National Laboratory, Box 808, Livermore CA 94551, niehl@llnl.gov
J. G. Wang
Affiliation:
Lawrence Livermore National Laboratory, Box 808, Livermore CA 94551, niehl@llnl.gov
J. Wadsworth
Affiliation:
Lawrence Livermore National Laboratory, Box 808, Livermore CA 94551, niehl@llnl.gov
T. Mukai
Affiliation:
Osaka Municipal Technical Research Institute, Osaka 536, Japan
C. T. Liu
Affiliation:
Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge TN 37831
Get access

Abstract

The thermal properties of an amorphous alloy (composition in at.%: Zr-10Al-5Ti-17.9Cu-14.6Ni), and particularly the glass transition and crystallization temperature as a function of heating rate, were characterized using Differential Scanning Calorimetry (DSC). X-ray diffraction analyses and Transmission Electron Microscopy were also conducted on samples heat-treated at different temperatures for comparison with the DSC results. Superplasticity in the alloy was studied at 410°C, a temperature within the supercooled liquid region. Both single strain rate and strain rate cycling tests in tension were carried out to investigate the deformation behavior of the alloy in the supercooled liquid region. The experimental results indicated that the alloy did not behave like a Newtonian fluid.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable