Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T07:12:57.859Z Has data issue: false hasContentIssue false

Surface Modification of Polytetrafluoroethylene by Ar+ Irradiation for Improving Adhesion to other Materials

Published online by Cambridge University Press:  03 September 2012

S. K. Koh
Affiliation:
Division of Ceramics, Korea Institute of Science and Technology, P.O. Box 131, Cheongryang, Seoul, 130-650, Korea
S. C. Park
Affiliation:
Samyang Group R&D Center, 63-2 Hwaam-Dong, Yusung-Gu, Taejeon, Korea
J. W. Seok
Affiliation:
Division of Ceramics, Korea Institute of Science and Technology, P.O. Box 131, Cheongryang, Seoul, 130-650, Korea
S. C. Choi
Affiliation:
Division of Ceramics, Korea Institute of Science and Technology, P.O. Box 131, Cheongryang, Seoul, 130-650, Korea
W. K. Choi
Affiliation:
Division of Ceramics, Korea Institute of Science and Technology, P.O. Box 131, Cheongryang, Seoul, 130-650, Korea
H. J. Jung
Affiliation:
Division of Ceramics, Korea Institute of Science and Technology, P.O. Box 131, Cheongryang, Seoul, 130-650, Korea
Get access

Abstract

Ion Irradiation on polytetrafluoroethylene(PTFE) has been carried out to improve adhesion to metal and to adhesive cement. Argon ion was irradiated on the polymer, and amount of Ar+ was changed from 1014 ions/cm2 to l×1017 ions/cm2 at 1 keV, and 4 ml/min of oxygen gas was flowed near the polymer surface during the ion irradiation. Wetting angle was changed from 100 degree to 70 – 150 degree depending on the ion beam condition. The changes of wetting angle and effects of Ar+ irradiation in oxygen environment were explained in a view of surface morphology due to the ion beam irradiation onto PTFE and formation of hydrophilic group due to a reaction between irradiated polymer chain and the blown oxygen. Strongly enhanced adhesions were explained by interlock mechanism, formation of electron acceptor groups on the modified PTFE, and interfacial chemical reaction between the irradiated surface and the deposited materials.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable