Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T02:36:32.632Z Has data issue: false hasContentIssue false

Surface quality evaluation of hot deformed aluminum

Published online by Cambridge University Press:  22 July 2016

L.A. Espinosa Zúñiga*
Affiliation:
Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, UANL, AP-149F, CP-66451, Cd. Universitaria, N.L. México.
F.A. Pérez González
Affiliation:
Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, UANL, AP-149F, CP-66451, Cd. Universitaria, N.L. México.
O. Zapata
Affiliation:
Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, UANL, AP-149F, CP-66451, Cd. Universitaria, N.L. México.
N.F. Garza Montes de Oca
Affiliation:
Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, UANL, AP-149F, CP-66451, Cd. Universitaria, N.L. México.
S. Haro
Affiliation:
Unidad Académica de Ingeniería, Universidad Autónoma de Zacatecas, Av. López Velarde No. 801, Centro, C.P. 98000, Zacatecas, Zac. México.
Get access

Abstract

The surface quality of a heat treatable Al-Si-Mg alloy by means compression tests at 450°C was evaluated. Samples were obtained from an ingot with unidirectional solidification in order to obtain a microstructural gradient influenced by the cooling and solidification rate. The samples were heat treated by homogenization at 520°C for 4 hours prior to deformation by compression. Inverted optical and scanning electron microscopes were used to assess the surface damage of deformed samples.

Analysis of deformed surface indicates a greater influence of microstructural refinement on hardening rate. It was found that the samples solidified at high cooling rates showed no defects, but at low cooling rates produced growth of grain size and intermetallic phases and thereby the high incidence of cracks in the surface.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable