Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T17:55:17.559Z Has data issue: false hasContentIssue false

Synchroshear Versus Conventional Shear Mechanisms in Transitionmetal Disilicides with the C40 Structure

Published online by Cambridge University Press:  15 February 2011

H. Inui
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606–8501, Japan
M. Yamaguchi
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606–8501, Japan
Get access

Abstract

The deformation behavior of (0001) <1210> basal slip in single crystals of five different transitionmetal disilicides with the C40 structure has been investigated in the temperature range from room temperature to 1500°C in compression. These disilicides are found to be classified into two groups depending on the onset temperature for plastic flow. The low-temperature group, which consists of VSi2, NbSi2 and TaSi2, exhibits the onset temperature for plastic flow around 0.3 T/Tm (melting temperature) and deforms by a conventional shear mechanism. In contrast, the high temperature group, which consists of CrSi2 and Mo(Si,Al)2, exhibits the onset temperature around 0.6T/Tm and deforms by a synchroshear mechanism. Factors affecting the deformation mechanism in these C40 disilicides are discussed in terms of directionality of atomic bonding and the relative stability of the C40 phase with respect to the C11b phase.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable