Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T23:10:49.601Z Has data issue: false hasContentIssue false

Synthesis and Characterization of Gd(1−x)SrxCo(1−y)FeyO(3−Δ) as a Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells

Published online by Cambridge University Press:  26 February 2011

C. R. Dyck
Affiliation:
Dept. of Mechanical Engineering, Nicol Hall, Queen's University, Kingston, ON, K7L 3N6, Canada
G. Yu
Affiliation:
Dept. of Mechanical Engineering, Nicol Hall, Queen's University, Kingston, ON, K7L 3N6, Canada
V. D. Krstic
Affiliation:
Dept. of Mechanical Engineering, Nicol Hall, Queen's University, Kingston, ON, K7L 3N6, Canada
Get access

Abstract

Gd(1−x)SrxCoO(3−Δ) (GSC) is a promising cathode material system for use in IT-SOFCs due to its high catalytic activity for oxygen reduction and appreciable conductivity. However, it has a high thermal expansion coefficient that is unmatched to the common IT-SOFC electrolyte material, Ce0.8Gd0.2O(2−Δ) (CGO). Gd0.8Sr0.2CoO(3−Δ) (GS20C) was determined to provide the best balance of properties as a base composition in the GSC system for further study. GS20C exhibited electrical conductivity of 400 S cm−1 at 600°C and a linear thermal expansion coefficient of 23 ppm/°C. Manipulation of the Co-site in GS20C by Fe substitution to form Gd(0.8)Sr(0.2)Co(1−y)FeyO(3−Δ) (GS20CFY, Y= 0, 20, 40, 60, 80, 100 atomic%) resulted in a dramatic decrease in the thermal expansion coefficient to a level close to that of the electrolyte (∼13 ppm/°C). However, the decrease in thermal expansion was accompanied by a large decrease in the conductivity as the iron content was increased in the system (to ∼10 S cm−1). Alternatively, formation of GS20C/CGO composite cathodes resulted in thermal matching with the electrolyte material up to the IT-SOFC operating temperature of approximately 600°C with the maintenance of high electrical conductivity. Composite GS20C/CGO cathodes may reduce the problems associated with poor GSC thermal matching to the electrolyte without compromising other important cathodic properties.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable