Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T16:56:20.665Z Has data issue: false hasContentIssue false

Synthesis of a Metallic Ceramic -Ti3SiC2 by PDS Process and its Properties

Published online by Cambridge University Press:  11 February 2011

ZhengMing Sun
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST Tohoku), 4–2–1 Nigatake, Miyagino, Sendai 983–8551, Japan (z.m.sun@aist.go.jp)
Hitoshi Hashimoto
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST Tohoku), 4–2–1 Nigatake, Miyagino, Sendai 983–8551, Japan (z.m.sun@aist.go.jp)
ZheFeng Zhang
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST Tohoku), 4–2–1 Nigatake, Miyagino, Sendai 983–8551, Japan (z.m.sun@aist.go.jp)
SongLang Yang
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST Tohoku), 4–2–1 Nigatake, Miyagino, Sendai 983–8551, Japan (z.m.sun@aist.go.jp)
Toshihiko Abe
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST Tohoku), 4–2–1 Nigatake, Miyagino, Sendai 983–8551, Japan (z.m.sun@aist.go.jp)
Get access

Abstract

Powder mixtures of Ti/Si/C, Ti/SiC/C, Ti/Si/TiC, Ti/SiC/TiC and Ti/TiSi2/TiC were used for the synthesis of Ti3SiC2 by using a pulse discharge sintering (PDS) process. The Ti/Si/TiC powder was found to be the best among the five powder mixtures for the Ti3SiC2 synthesis. The highest content of Ti3SiC2 can be improved to about 99wt% at the sintering temperature of 1300°C for 15 minutes. The relative density of all the synthesized samples is higher than 98–99% at the sintering temperature above 1275°C. The nearly single phase Ti3SiC2 was found to show plastic deformation at room temperature and a good machinability. Both electrical and thermal conductivity were found to be more than two times of the value of a control pure Ti sample. The high-temperature mechanical tests confirmed that the Ti3SiC2 samples synthesized by the PDS process displayed a comparable performance with those fabricated by the other techniques.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable