Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T21:16:25.827Z Has data issue: false hasContentIssue false

A TEM Study of Dynamic Continuous Recrystallization in a Superplastic AL-4MG-0.3SC Alloy

Published online by Cambridge University Press:  10 February 2011

L.M. Dougherty
Affiliation:
Dept of Materials Science & Engineering, Univ of Illinois at Urbana-Champaign, Urbana, IL
I.M. Robertson
Affiliation:
Dept of Materials Science & Engineering, Univ of Illinois at Urbana-Champaign, Urbana, IL
J.S. Vetrano
Affiliation:
Pacific Northwest National Laboratory, Richland, WA
Get access

Abstract

An Al-4Mg-0.3Sc alloy, aged at 280°C for 8 hours and cold rolled to a 70% reduction, exhibited dynamic recrystallization during superplastic forming at 460°C and at a strain rate of 10−3sec−1. To understand the progression of recrystallization during forming, specimens were deformed under these same conditions to 0.1, 0.2, 0.4 and 0.8 true strain and studied postmortem using optical microscopy, transmission electron microscopy and orientation imaging microscopy. The microstructural evolution that occurred between each strain state was directly observed during deformation experiments at a nominal temperature of 460°C in the transmission electron microscope. These in-situ experiments showed the migration, coalescence, disintegration and annihilation of subboundaries. This combination of post-mortem analysis of specimens strained in bulk with real time observations made during these in-situ experiments allows the mechanisms operating during dynamic continuous recrystallization to be ascertained.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable