Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T20:01:01.310Z Has data issue: false hasContentIssue false

Temperature dependent behavior of flat and bulk heterojunction organic solar cells

Published online by Cambridge University Press:  01 February 2013

Johannes Widmer*
Affiliation:
Institut für Angewandte Photophysik (IAPP), Technische Universität Dresden George-Bähr-Straße 1, 01062 Dresden, Germany
Karl Leo*
Affiliation:
Institut für Angewandte Photophysik (IAPP), Technische Universität Dresden George-Bähr-Straße 1, 01062 Dresden, Germany
Moritz Riede*
Affiliation:
Institut für Angewandte Photophysik (IAPP), Technische Universität Dresden George-Bähr-Straße 1, 01062 Dresden, Germany
Get access

Abstract

The open-circuit voltage of an organic solar cell is increasing with decreasing temperature and with increasing illumination intensity. These dependencies are quantitatively investigated for two types of organic solar cells, one with a flat donor-acceptor heterojunction and one with a mixed layer bulk heterojunction. Zinc-phthalocyanine and C60 are used as donor and acceptor, respectively. A qualitative difference is found for the two geometries. We find that a logarithmic illumination intensity dependence with temperature as a linear pre-factor of the logarithm, which is commonly reported and observed, is applicable for the bulk heterojunction. The flat heterojunction, in contrast, shows a constant illumination intensity pre-factor which is independent of the temperature, and the temperature can be modeled as additional linear summand.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable