Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T23:26:49.244Z Has data issue: false hasContentIssue false

Ternary Alloying of Refractory Intermetallics

Published online by Cambridge University Press:  26 February 2011

D. M. Shah
Affiliation:
Pratt & Whitney, 400 Main Street, East Hartford, CT 06108
D. L. Anton
Affiliation:
United Technologies Research Center, Silver Lane, East Hartford, CT 06108
Get access

Abstract

One of the most attractive attributes of intermetallics is their potential for alloying to achieve the desired balance of engineering properties via the creative use of in-situ composite processing. Following our initial investigation of 20 binary refractory intermetallics, selected primarily on the basis of structure type; seven systems were down selected for ternary alloying, based on a balanced consideration of room temperature toughness, high temperature creep strength, oxidation resistance and ultimate strength. These systems were Nb3Al and Cr3Si with A15 structure, CO2Nb and Cr2Nb Laves phases with C14/C15 structure, MoSi2 with C11b structure, and Nb2Al and Mo5Si3 sigma phases.

The alloying potential of each of these binary systems is evaluated with respect to solubility limits, phase relationships, melting point suppression with alloying, and potential for enhancement of creep resistance. The results show that, with alloyed intermetallics, realistic creep strength is attainable and several opportunities exist for in-situ processing of intermetallic based composite systems to improve room temperature toughness.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable