Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-17T22:58:30.421Z Has data issue: false hasContentIssue false

Textured Pb(Zr0.54Ti0.46)O3 Thin Films with YBa2Cu3O7-δ and Yttria-Stabilized Zirconia Buffer Layers on (001)Si

Published online by Cambridge University Press:  21 February 2011

Tsvetanka Zheleva
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695-7916
P. Tiwari
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695-7916
J. Narayan
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695-7916
Get access

Abstract

Characteristics of textured Pb(Zr0.54Ti0.46)O3 (PZT) thin films on (001)Si with YBa2Cu3O7-δ (YBCO) and yttria-stabilized zirconia (YSZ) buffer layers have been studied using X-ray diffraction and high resolution electron microscopy techniques. Excimer KrF laser has been used for deposition of PZT, YBCO and YSZ thin films. The YBCO layer was utilized to provide a seed for PZT growth, while YSZ layer acted as a seed and a buffer layer for the growth of YBCO on (001)Si. High-resolution transmission electron microscopy (HRTEM) and X-ray diffraction were used to determine the texture and the nature of defects, interfaces and grain boundaries. Predominant orientation relationships were found to be [001]PZT//[001]YBCO; [001]YBCO//[001]YSZ; and [001]YSZ//[001]Si.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable