Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T14:47:21.861Z Has data issue: false hasContentIssue false

Thermal Properties of Cu-Hf-Ti Metallic Glass Compositions

Published online by Cambridge University Press:  05 March 2013

I. A. Figueroa*
Affiliation:
Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Cd. Universitaria, Del. Coyoacán, México D.F. C. P. 04510, México.
Get access

Abstract

The glass transition temperature T g , crystallization temperature T x , solidus temperature T m , and liquidus temperature T l , of a number of ternary Cu-Hf-Ti glassy alloys in the composition range of 51< Cu <67, 5 < Hf < 40 and 5 < Ti <40 (at.%) are reported and discussed. It is found that increasing the Ti:Hf ratio results in a rapid decreasing of T g and T x . This behavior is related to the fact that the melting point and cohesive energy for Ti are substantially lower than for Hf. The solidus temperature T m , remains relatively constant on a wide range of compositions. The liquidus temperatures data suggest a ternary eutectic within the compositional field encompassed by the Cu55Hf20Ti25, Cu59Hf21Ti20, Cu60Hf20Ti20 and Cu55Hf21Ti24 alloys, with a liquidus temperature, T l , of ∼1170 K; this is supported by the DTA traces, which show a single melting peak. Based on the DTA analysis, the experimentally calculated liquidus projection for the ternary Cu-Hf-Ti alloy system is also reported.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable