Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T09:00:34.117Z Has data issue: false hasContentIssue false

Thermal Shock Behavior of Open Cell Ceramic Foams

Published online by Cambridge University Press:  21 February 2011

Robert M. Orenstein
Affiliation:
General Electric Company, Power Generation Engineering, 1 River Rd., Schenectady, NY 12345
David J. Green
Affiliation:
The Pennsylvania State University, Department of Materials Science and Engineering, University Park, PA 16802
Albert E. Segall
Affiliation:
Center for Advanced Materials, 410 Walker Bldg., University Park, PA 16802
Get access

Abstract

Specimens of heated alumina foams were thermally shocked by immersion in water or oil. Two distinct temperature profiles were found to exist during liquid quenching: a macroscopic gradient due to heating of the fluid during infiltration into the foam and a microscopic gradient across each individual strut. Thermal stresses were calculated using a semi-empirical, finite element model. The peak thermal stresses were coupled with the two-parameter Weibull distribution of the strut strengths to calculate the probability of crack extension on a strut for eight cellular geometries. Experimentally, the thermal shock resistance increased with increasing relative density and increasing cell size. The predicted critical temperature differences were in fair agreement with measured values.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable