Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T19:19:54.316Z Has data issue: false hasContentIssue false

Thermodynamic Modeling and Solidification Simulation of Ti-Al-Cr alloys

Published online by Cambridge University Press:  03 March 2011

Y. Yang
Affiliation:
CompuTherm LLC, Madison, Wisconsin 53719, USA
B.P. Bewlay
Affiliation:
General Electric Global Research, Schenectady, New York 12301, USA
Y.A. Chang
Affiliation:
University of Wisconsin-Madison, Madison, Wisconsin 53706, USA
Get access

Abstract

Titanium aluminide based alloys are candidate materials for high temperature structural applications. They are typically alloyed with elements such as Nb, Ta, Mo, Cr and B for property enhancement. To understand the relationship between microstructure and alloy composition/processing condition, detailed models of phase equilibria in multicomponent Ti-Al based alloys are needed. In this work, we developed thermodynamic models for the phases in the Ti-Al-Cr system based on critically assessed binary models and ternary experimental data in literature, using the CALPHAD approach. Isothermal sections at 1200, 1150, 1000 and 800°C, and the liquidus projection, were calculated from the currently developed thermodynamic models; these are in satisfactory agreement with experimental data. Isopleths were calculated at specified Cr concentrations, and solidification paths were simulated under the Scheil conditions for a range of Ti-Al-Cr alloys. From the calculated phase diagrams and solidification paths, the effect of Cr on the microstructure of Ti-Al alloys can be understood.

Keywords

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable