Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T17:06:50.773Z Has data issue: false hasContentIssue false

Thickness-Dependent Electrical Properties in Lanthanum-Doped Pzt Thick Films

Published online by Cambridge University Press:  10 February 2011

H.D. Chen
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
K.K. Li
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
C.J. Gaskey
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
L.E. Cross
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
Get access

Abstract

Lanthanum-doped lead zirconate titanate (PLZT) films, with thickness up to 10 μm, are fabricated on platinized silicon substrates through a modified sol-gel technique. Thicknessdependent piezoelectric properties measured with a double-beam laser interferometer show piezoelectric relaxation in field-induced strain as the ac driving field exceeds 10 kV/cm. In addition, the strain levels of PLZT thick films are approximately one third of those of undoped PZT films under the same fabrication and measurement conditions. For 1 μm PZT(55/45) films doped with 0, 2, and 4 mole% La, the P-E hysteresis exhibits decreasing squareness with increasing lanthanum content while the piezoelectric d33 coefficient reduces from 130 to 52 pC/N. Residual (tensile) stress in these films and resulted depoling effect may be responsible for this phenomenon.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable