Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T16:58:23.594Z Has data issue: false hasContentIssue false

Thin Film Fuel Cells

Published online by Cambridge University Press:  16 February 2011

V.E.J. Van Dieten
Affiliation:
Laboratory for Applied Inorganic Chemistry, Delft University of Technology, Julianalaan 136, 2628 BL Delft, The Netherlands
J.P. Dekker
Affiliation:
Laboratory for Applied Inorganic Chemistry, Delft University of Technology, Julianalaan 136, 2628 BL Delft, The Netherlands
J. Schoonman
Affiliation:
Laboratory for Applied Inorganic Chemistry, Delft University of Technology, Julianalaan 136, 2628 BL Delft, The Netherlands
Get access

Abstract

In recent years there has been an enormous increase in the application of thin film technologies in the fabrication of solid state electrochemical devices. Devices in which thin film components are utilized are, e.g. solid oxide fuel cells (SOFCs), thin film rechargeable batteries, and chemical gas sensors. Chemical vapour deposition (CVD) is one of the synthesis techniques for the fabrication of thin film components for solid state electrochemical devices. This paper will focus on the application of novel CVD techniques for the fabrication of the thin film components of one of these devices, i.e. the solid oxide fuel cell. A new SOFC design concept which uses only one gas phase synthesis method will be presented.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable