Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T23:33:16.592Z Has data issue: false hasContentIssue false

Thin Film InN/Anatase Bilayers as a Substitute Dye/Semiconductor Interface for Solar Cells

Published online by Cambridge University Press:  01 February 2011

Daniel Hoy
Affiliation:
dh851403@ohio.edu, Ohio University, Physics and Astronomy, Clippinger Labs RM 251B, Athens, OH, 45701, United States
Martin Kordesch
Affiliation:
kordesch@ohio.edu, Ohio University, Physics and Astronomy, Clippinger Labs RM 251B, Athens, OH, 45701, United States
Get access

Abstract

The electronic properties of an InN/anatse bilayer, proposed as a replacement for the dye/semi-conductor interface in Dye Sensitized Solar Cell[1, 2], are measured. RF sputtered thin films of anatase and InN are used as the “dye” replacement. .Two types of InN film are prepared: polycrystalline samples deposited at high temperature, with an optical band gap of < 1 eV, and as-deposited (at least partially amorphous) samples with an optical band gap >1 eV.Energy Dispersive X-ray fluorescence, X-ray Diffraction, and Raman spectroscopy are used to characterize the samples. The resistance in the dark and under illumination are measured.The samples deposited at high temperature are crystalline and have a sheet resistivity ≈ 4 Ω/⁐, and display no photoconductivity.The partially amorphous samples have sheet resistivity of≈ 500Ω/⁐. Since both types of InN films, including high quality (based on band gap) polycrystalline InN, do not show increased conductivity with light, we conclude that a solar cell based on an InN/anatase bilayer is not feasible.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable