Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T21:22:08.072Z Has data issue: false hasContentIssue false

Threshold Crack Size in A Pyrolytic Carbon for no Growth Under Cyclic Stress

Published online by Cambridge University Press:  15 February 2011

M A Ling
Affiliation:
Department of Materials Science and Engineering University of California, Los Angeles, CA 90095, USA
George H. Sines
Affiliation:
Department of Materials Science and Engineering University of California, Los Angeles, CA 90095, USA
C. Barclay Gilpin
Affiliation:
Department of Mechanical Engineering California State University, Long Beach, CA 90840, USA
Get access

Abstract

In this work, the fracture toughness of monolithic pyrolytic carbon and sandwich composites of this carbon on a graphite substrate were measured by a disk-shaped compact specimen and by using a tensile specimen. On this material, a large number of specimens that had small cracks induced by a Vickers diamond indenter were tested under cyclic stress. The existence of a true threshold stress intensity factor range for non-propagation of the cracks was demonstrated. Statistical confidence on pre-cracked specimens was obtained through testing a large number of specimens to a very long lifetime of the order of 109 cycles.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable