Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T16:17:19.849Z Has data issue: false hasContentIssue false

Ti-Modified Niobium-Silicide Based Directionally Solidified in-situ Composites

Published online by Cambridge University Press:  15 February 2011

B. P. Bewlay
Affiliation:
General Electric Company, Corporate Research and Development Center, Schenectady, NY 12301
M. R. Jackson
Affiliation:
General Electric Company, Corporate Research and Development Center, Schenectady, NY 12301
H. A. Lipsitt
Affiliation:
Department of Mechanical and Materials Engineering, Wright State University, Dayton, OH 45435.
Get access

Abstract

This paper examines microstructure-property relationships in high-temperature directionally solidified (DS) in-situ composites based on Nb silicides, such as Nb3Si and Nb5Si3. These in-situ composites are based on the Nb3Si-Nb binary eutectic, and are alloyed with Ti. They were prepared using cold crucible Czochralski crystal growth. Ternary Nb-Ti-Si alloys with Ti concentrations from 9 to 45%, and Si concentrations from 10 to 25%, were directionally solidified to generate aligned two- and three-phase composites containing a Nb solid solution with Nb3Si and Nb5Si3 silicides. Fracture toughness values generally greater than 10 MPa√m were measured in these composites. For a given Si concentration, the fracture toughness of the Ti-containing composites was increased ∼ 6 MPa√m over that of the binary alloy composites. The effects of Si concentration, and a range of Nb:Ti ratios, on microstructure, phase equilibria, and fracture toughness were examined.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable