Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T09:40:51.074Z Has data issue: false hasContentIssue false

Tin as a Diffusion Barrier Between CoSi2 or PtSi and Aluminum

Published online by Cambridge University Press:  15 February 2011

R. J. Schutz*
Affiliation:
Bell Laboratories, Murray Hill, NJ 07974, (U.S.A.)
Get access

Abstract

The effectiveness of a thin (360Å) layer of reactively sputtered TiN as a diffusion barrier between aluminum and two silicides (PtSi and CoSi2) was evaluated. The chemical composition, structural phases and electrical properties of silicide/Al and silicide/TiN/Al contacts to n-type silicon were studied by Rutherford backscattering spectroscopy, glancing angle X-ray diffraction and Schottky barrier height measurements respectively. The results show that TiN is an effective barrier in these two systems up to at least 450°C, the typical temperature at which aluminum contacts are sintered.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable