Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T05:15:46.672Z Has data issue: false hasContentIssue false

Torsion Testing Of Diffusion Bonded Liga Formed Nickel

Published online by Cambridge University Press:  10 February 2011

T. R. Christenson
Affiliation:
Sandia National Laboratories, PO Box 5800, MS-0329, Albuquerque, NM 87185
T. E. Buchheit
Affiliation:
Sandia National Laboratories, PO Box 5800, MS-0329, Albuquerque, NM 87185
D. T. Schmale
Affiliation:
Sandia National Laboratories, PO Box 5800, MS-0329, Albuquerque, NM 87185
Get access

Abstract

A test technique has been devised which is suitable for the testing of the bond strength of batch diffusion bonded LIGA or DXRL defined structures. The method uses a torsion tester constructed with the aid of LIGA fabrication and distributed torsion specimens which also make use of the high aspect ratio nature of DXRL based processing. Measurements reveal achieved bond stengths of 130 MPa between electroplated nickel with a bond temperature of 450°C at 7 ksi pressure which is a sufficiently low temperature to avoid mechanical strength degradation.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable