Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T15:58:47.122Z Has data issue: false hasContentIssue false

Toughening of MDF - OPC Composites

Published online by Cambridge University Press:  16 February 2011

C. K. Park
Affiliation:
The Materials Research Laboratory, The Pennsylvania State University, University Park, Pa. 16802
M. R. Silsbee
Affiliation:
The Materials Research Laboratory, The Pennsylvania State University, University Park, Pa. 16802
D. M. Roy
Affiliation:
The Materials Research Laboratory, The Pennsylvania State University, University Park, Pa. 16802
Get access

Abstract

Macro-Defect-Free (MDF) materials are cement-polymer composites exhibiting high flexural strengths and high toughness (for cement based systems). The incorporation of fibers into MDF composites has been found to offer the possibility of increasing both the ultimate flexural strength and toughness of MDF materials prepared using an ordinary portland cement-polyacrylamide matrix.

This paper examined the effect of fiber type and fine particles as a packing filler on the resulting mechanical properties. The incorporation of non-traditional materials (for MDF) into the MDF matrix is also discussed.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable