Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T16:28:02.197Z Has data issue: false hasContentIssue false

Towards a High Quality Factor DC Electric Field Switchable Barium Strontium Titanate Solidly Mounted Resonator

Published online by Cambridge University Press:  31 January 2011

George N. Saddik
Affiliation:
gnsaddik@ece.ucsb.edu, University of California Santa Barbara, Electrical and Computer Engineering, Santa Barbara, United States
Junwoo Son
Affiliation:
junwoo.son@mrl.ucsb.edu, University of California Santa Barbara, Materials, Santa Barbara, United States
Susanne Stemmer
Affiliation:
stemmer@mrl.ucsb.edu, University of California, Santa Barbara, Materials, Santa Barbara, California, United States
Robert A. York
Affiliation:
rayork@ece.ucsb.edu, University of California Santa Barbara, Electrical and Computer Engineering, Santa Barbara, United States
Get access

Abstract

Barium strontium titanate solidly mounted resonators (SMR) were fabricated with three different acoustic Bragg reflectors (ABR) on a sapphire substrate. The three devices had ABR structures consisting of W/SiO2/W/SiO2, Mo/SiO2/Mo/SiO2, and Pt/SiO2/Pt/SiO2 respectively. The s-parameters of all three devices were measured. The results showed that the quality factor increased as a function of the material in the ABR structure. The quality factor for the devices with tungsten, molybdenum and platinum in the ABR structures are 101, 88, and 31, respectively. This investigation showed how the material in the ABR structure can contribute to the acoustic loss in the device.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable