Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T18:41:03.118Z Has data issue: false hasContentIssue false

Transition from Grey to White and White to Grey in Fe-C-X Eutectic Alloys

Published online by Cambridge University Press:  21 February 2011

P. Magnin
Affiliation:
Swiss Federal Institute of Technology/Ch. de Bellerive 34, 1007 Lausanne
W. Kurz
Affiliation:
Swiss Federal Institute of Technology/Ch. de Bellerive 34, 1007 Lausanne
Get access

Abstract

The effect of small additions of Si, P, Cr, Mn and Ti on transition velocities from grey to white and white to grey of pure Fe-C eutectics has been measured by varying growth rates in directional solidification experiments. Growth undercoolings were measured as a function of growth rate, while white and grey eutectic temperatures were obtained from DTA experiments. As a result of these experiments, alloying elements can be classified into three categories : graphitizing (Si, P), carburizing (Cr) and “opposite effect” (Mn, Ti). Each category is characterized by a given influence on eutectic temperature, growth undercooling, and nucleation of cementite. A qualitative model which permits determination of the influence of alloying elements on these latter three parameters is proposed.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable