Hostname: page-component-7b7567c8c-mnklg Total loading time: 0 Render date: 2026-11-13T12:27:44.663Z Has data issue: false hasContentIssue false

Tunability in Ba1– x Srx TiO3-based Ferroelectrics

Published online by Cambridge University Press:  18 March 2011

Daniel M. Potrepka
Affiliation:
Sensors and Electron Devices Directorate, Army Research Laboratory, Adelphi, MD 20783-1197, U.S.A.
Steven C. Tidrow
Affiliation:
Sensors and Electron Devices Directorate, Army Research Laboratory, Adelphi, MD 20783-1197, U.S.A.
Arthur Tauber
Affiliation:
Sensors and Electron Devices Directorate, Army Research Laboratory, Adelphi, MD 20783-1197, U.S.A.
Get access

Abstract

Ferroelectrics are presently of interest for phase shifters, filters, and true time delay devices. Voltage tunable paraelectrics have the potential to lower device cost and reduce power consumption compared with presently available devices. In order to improve device performance to acceptable levels, materials must have high tunability, low dielectric constant, low loss tangent, and low leakage current. Using existing predictive techniques, compositions of Ba0.6Sr0.4TiO3-based ferroelectrics with charge-compensated substitutions for Ti4+ were synthesized. Results of capacitance measurements are used to obtain dielectric constant and tunability in the paraelectric (T > T C ) regime. The relevance to device requirements is discussed. Results for substituted samples are compared to those for (unsubstituted) Ba0.6Sr0.4TiO3. Discussion of the impact of the results on predictive techniques for tunability is addressed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable