Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T11:44:14.465Z Has data issue: false hasContentIssue false

Two-dimensional modeling of organic field effect transistors

Published online by Cambridge University Press:  01 February 2011

T. Li
Affiliation:
Department of Electrical and Computer Engineering, University of Minnesota Minneapolis, MN 55455, USA
P. P. Ruden
Affiliation:
Department of Electrical and Computer Engineering, University of Minnesota Minneapolis, MN 55455, USA
I. H. Campbell
Affiliation:
Los Alamos National Laboratory Los Alamos, NM 87545, USA
D. L. Smith
Affiliation:
Los Alamos National Laboratory Los Alamos, NM 87545, USA
Get access

Abstract

We present device simulations for p-channel organic field effect transistors. The current conservation equation and Poisson's equation are solved self-consistently in two dimensions in the drift-diffusion approximation. We focus on modeling transistor structures consisting of a gate electrode, a silicon dioxide gate insulator, and a pentacene or a conjugated polymer layer as the active (channel) material. The source and drain contacts are taken to be deposited directly on the gate insulator (bottom contact structure). We examine the effects associated with differences in charge carrier injection for different source and drain contact materials. It is also shown that, if the organic material immediately adjacent to the contacts has poor conduction properties, ‘parasitic’ source and drain series resistances that depend on the contact/organic injection barrier height as well as the channel material mobility can result.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable