Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T11:24:10.945Z Has data issue: false hasContentIssue false

Unusual Rapidity of Electron Beam Transient Tempering

Published online by Cambridge University Press:  26 February 2011

Anjum Tauqir
Affiliation:
Dept. of Metallurgy & Institute of Material Science, University of Connecticut, Storrs, Connecticut 06268
Peter R. Strutt
Affiliation:
Dept. of Metallurgy & Institute of Material Science, University of Connecticut, Storrs, Connecticut 06268
Get access

Abstract

Electron beam rapid solidification of molybdenum-base high speed steels results in quenched-in metastable phases containing a high concentration of alloying elements. Thermal reprocessing of such material by momentary interaction with the electron beam results in decomposition of martensite at a rate ≈ 100 times faster than that occurring during conventional thermal treatment. It is postulated that this arises from a high concentration of 'defect cluster nucleation sites' during the rapid up-quenching. The product of short thermal treatment is a dispersion of 2–5 nm very fine precipitates identified using transmission electron microscopy as MC type carbides.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable