Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-17T22:33:45.660Z Has data issue: false hasContentIssue false

Use of Shock Waves to Measure Adhesion at Interfaces

Published online by Cambridge University Press:  15 February 2011

Gerald L. Nutt
Affiliation:
Lawrence Livermore National Laboratory, 7000 East Avenue, P.O.Box 808, Livermore, CA. 94550
Wayne E. King
Affiliation:
Lawrence Livermore National Laboratory, 7000 East Avenue, P.O.Box 808, Livermore, CA. 94550
Get access

Abstract

The central problem in the study of composite materials is the adhesive strength of the electronic bond between reinforcement and matrix. We have introduced a unique method of measuring the interface bond strength of a wide variety of engineering interfaces (e.g. metal/ceramic, semiconductor/metal, metal/polymer). Specimens are composed of a relatively thin overlayer on a thick substrate. The specimens are shocked using a magnetic hammer which accelerates a thin metal flyer onto the substrate. The shock, upon reflection at the free surface, is incident on the bonded interface as a tensile wave, spalling the overlayer. The method is unique in using free surface velocity measurements to determine the interface stress at the instant of separation. The debonding process is sufficiently rapid (on the order of 1.0 ns) that debonding occurs by the simultaneous breaking of atomic bonds, rather than by propagation of cracks nucleating at stress concentrations near existing flaws.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable